We’re rewarding the question askers & reputations are being recalculated! Read more.
4 added 4 characters in body
source | link

Yes, the presentation values of Item A are stored as an XML construct in the raw values of the Renderings field.

You can see that field here: enter image description here

If you follow the blue arrows and click on Raw Values you'll see:

enter image description here

Brute ForceRaw Values Method

Select the rendering field value, copy, and then in Item B, do the same thing, but PASTE the field value there.

Turn off Raw Values, and you should see the presentation on both Items now.

Editor Method

You can also use the Copy To dialogue as well. Which has been there forever, and I always forget about it.

enter image description here

SPECIAL NOTE

While this is the direct answer to your question, there is an architectural viewpoint that must be considered. Generally, adjusting presentation on Items directly is frown upon, because you break the association that it might have with the Template Standard Values that the Item derives from.

In those cases, generally you only muck with Final Renderings on the item itself, and Renderings on the Template Standard Values that the Item is made from.

For more information on that, take a peek at Sitecore's documentation on editing the layout of an item.

Yes, the presentation values of Item A are stored as an XML construct in the raw values of the Renderings field.

You can see that field here: enter image description here

If you follow the blue arrows and click on Raw Values you'll see:

enter image description here

Brute Force Method

Select the rendering field value, copy, and then in Item B, do the same thing, but PASTE the field value there.

Turn off Raw Values, and you should see the presentation on both Items now.

Editor Method

You can use the Copy To dialogue as well. Which has been there forever, and I always forget about it.

enter image description here

SPECIAL NOTE

While this is the direct answer to your question, there is an architectural viewpoint that must be considered. Generally, adjusting presentation on Items directly is frown upon, because you break the association that it might have with the Template Standard Values that the Item derives from.

In those cases, generally you only muck with Final Renderings on the item itself, and Renderings on the Template Standard Values that the Item is made from.

For more information on that, take a peek at Sitecore's documentation on editing the layout of an item.

Yes, the presentation values of Item A are stored as an XML construct in the raw values of the Renderings field.

You can see that field here: enter image description here

If you follow the blue arrows and click on Raw Values you'll see:

enter image description here

Raw Values Method

Select the rendering field value, copy, and then in Item B, do the same thing, but PASTE the field value there.

Turn off Raw Values, and you should see the presentation on both Items now.

Editor Method

You can also use the Copy To dialogue as well. Which has been there forever, and I always forget about it.

enter image description here

SPECIAL NOTE

While this is the direct answer to your question, there is an architectural viewpoint that must be considered. Generally, adjusting presentation on Items directly is frown upon, because you break the association that it might have with the Template Standard Values that the Item derives from.

In those cases, generally you only muck with Final Renderings on the item itself, and Renderings on the Template Standard Values that the Item is made from.

For more information on that, take a peek at Sitecore's documentation on editing the layout of an item.

3 added 3 characters in body
source | link

Yes, the presentation values of Item A are stored as an XML construct in the raw values of the Renderings field.

You can see that field here: enter image description here

If you follow the blue arrows and click on Raw Values you'll see:

enter image description here

Brute Force Method

Select the rendering field value, copy, and then in Item B, do the same thing, but PASTE the field value there.

Turn off Raw Values, and you should see the presentation on both Items now.

Editor Method

You can use the Copy To dialogue as well. Which has been there forever, and I always forget about it.

enter image description here

SPECIAL NOTE

While this is the direct answer to your question, there is an architectural viewpoint that must be considered. Generally, adjustadjusting presentation on Items directly is frown upon, because you break the association that it might have with the Template Standard Values that the Item derives from.

In those cases, generally you only muck with Final Renderings on the item itself, and Renderings on the Template Standard Values that the Item is made from.

For more information on that, take a peek at Sitecore's documentation on editing the layout of an item.

Yes, the presentation values of Item A are stored as an XML construct in the raw values of the Renderings field.

You can see that field here: enter image description here

If you follow the blue arrows and click on Raw Values you'll see:

enter image description here

Brute Force Method

Select the rendering field value, copy, and then in Item B, do the same thing, but PASTE the field value there.

Turn off Raw Values, and you should see the presentation on both Items now.

Editor Method

You can use the Copy To dialogue as well. Which has been there forever, and I always forget about it.

enter image description here

SPECIAL NOTE

While this is the direct answer to your question, there is an architectural viewpoint that must be considered. Generally, adjust presentation on Items directly is frown upon, because you break the association that it might have with the Template Standard Values that the Item derives from.

In those cases, generally you only muck with Final Renderings on the item itself, and Renderings on the Template Standard Values that the Item is made from.

For more information on that, take a peek at Sitecore's documentation on editing the layout of an item.

Yes, the presentation values of Item A are stored as an XML construct in the raw values of the Renderings field.

You can see that field here: enter image description here

If you follow the blue arrows and click on Raw Values you'll see:

enter image description here

Brute Force Method

Select the rendering field value, copy, and then in Item B, do the same thing, but PASTE the field value there.

Turn off Raw Values, and you should see the presentation on both Items now.

Editor Method

You can use the Copy To dialogue as well. Which has been there forever, and I always forget about it.

enter image description here

SPECIAL NOTE

While this is the direct answer to your question, there is an architectural viewpoint that must be considered. Generally, adjusting presentation on Items directly is frown upon, because you break the association that it might have with the Template Standard Values that the Item derives from.

In those cases, generally you only muck with Final Renderings on the item itself, and Renderings on the Template Standard Values that the Item is made from.

For more information on that, take a peek at Sitecore's documentation on editing the layout of an item.

2 added 241 characters in body
source | link

Yes, the presentation values of Item A are stored as an XML construct in the raw values of the Renderings field.

You can see that field here: enter image description here

If you follow the blue arrows and click on Raw Values you'll see:

enter image description here

Brute Force Method

Select the rendering field value, copy, and then in Item B, do the same thing, but PASTE the field value there.

Turn off Raw Values, and you should see the presentation on both Items now.

Editor Method

You can use the Copy To dialogue as well. Which has been there forever, and I always forget about it.

enter image description here

SPECIAL NOTE

While this is the direct answer to your question, there is an architectural viewpoint that must be considered. Generally, adjust presentation on Items directly is frown upon, because you break the association that it might have with the Template Standard Values that the Item derives from.

In those cases, generally you only muck with Final Renderings on the item itself, and Renderings on the Template Standard Values that the Item is made from.

For more information on that, take a peek at Sitecore's documentation on editing the layout of an item.

Yes, the presentation values of Item A are stored as an XML construct in the raw values of the Renderings field.

You can see that field here: enter image description here

If you follow the blue arrows and click on Raw Values you'll see:

enter image description here

Select the rendering field value, copy, and then in Item B, do the same thing, but PASTE the field value there.

Turn off Raw Values, and you should see the presentation on both Items now.

SPECIAL NOTE

While this is the direct answer to your question, there is an architectural viewpoint that must be considered. Generally, adjust presentation on Items directly is frown upon, because you break the association that it might have with the Template Standard Values that the Item derives from.

In those cases, generally you only muck with Final Renderings on the item itself, and Renderings on the Template Standard Values that the Item is made from.

For more information on that, take a peek at Sitecore's documentation on editing the layout of an item.

Yes, the presentation values of Item A are stored as an XML construct in the raw values of the Renderings field.

You can see that field here: enter image description here

If you follow the blue arrows and click on Raw Values you'll see:

enter image description here

Brute Force Method

Select the rendering field value, copy, and then in Item B, do the same thing, but PASTE the field value there.

Turn off Raw Values, and you should see the presentation on both Items now.

Editor Method

You can use the Copy To dialogue as well. Which has been there forever, and I always forget about it.

enter image description here

SPECIAL NOTE

While this is the direct answer to your question, there is an architectural viewpoint that must be considered. Generally, adjust presentation on Items directly is frown upon, because you break the association that it might have with the Template Standard Values that the Item derives from.

In those cases, generally you only muck with Final Renderings on the item itself, and Renderings on the Template Standard Values that the Item is made from.

For more information on that, take a peek at Sitecore's documentation on editing the layout of an item.

1
source | link